Merge branch 'neovim-0.5.0' of github.com:esensar/dotfiles into neovim-0.5.0

pull/1/head
Ensar Sarajčić 2021-03-11 11:07:52 +01:00
commit 1334bbcc8f
8 changed files with 205 additions and 8 deletions

View File

@ -64,3 +64,4 @@ Bitwarden
kwalletrc
Thunar
xfce4
Element

View File

@ -0,0 +1,194 @@
# Configuration file for libinput-gestures.
# Mark Blakeney, Sep 2015
#
# The default configuration file exists at /etc/libinput-gestures.conf
# but a user can create a personal custom configuration file at
# ~/.config/libinput-gestures.conf.
#
# Lines starting with '#' and blank lines are ignored. Currently
# "gesture" and "device" configuration keywords are supported as
# described below. The keyword can optionally be appended with a ":" (to
# maintain compatibility with original format configuration files).
#
# Each gesture line has 3 [or 4] arguments separated by whitespace:
#
# action motion [finger_count] command
#
# where action and motion is either:
# swipe up
# swipe down
# swipe left
# swipe right
# swipe left_up
# swipe left_down
# swipe right_up
# swipe right_down
# pinch in
# pinch out
# pinch clockwise
# pinch anticlockwise
#
# command is the remainder of the line and is any valid shell command +
# arguments.
#
# finger_count is a single numeric digit and is optional (and is
# typically 3 or 4). If specified then the command is executed when
# exactly that number of fingers is used in the gesture. If not
# specified then the command is executed when that gesture is executed
# with any number of fingers. Gesture lines specified with finger_count
# have priority over the same gesture specified without any
# finger_count.
#
# Typically command will be _internal, or xdotool. See "man xdotool" for
# the many things you can action with that tool. Note that unfortunately
# xdotool does not work with native Wayland clients.
###############################################################################
# SWIPE GESTURES:
###############################################################################
# Note the default is an "internal" command that uses wmctrl to switch
# workspaces and, unlike xdotool, works on both Xorg and Wayland (via
# XWayland). It also can be configured for vertical and horizontal
# switching over tabular workspaces, as per the example below. You can
# also add "-w" to the internal command to allow wrapping workspaces.
# Ensure you install wmctrl if you use _internal.
# Move to next workspace (works for GNOME/KDE/etc on Wayland and Xorg)
# gesture swipe up _internal ws_up
# NOTE ABOUT FINGER COUNT:
# The above command will configure this command for all fingers (i.e. 3
# for 4) but to configure it for 3 fingers only, change it to:
# gesture swipe up 3 _internal ws_up
# Then you can configure something else for 4 fingers or leave 4 fingers
# unconfigured. You can configure an explicit finger count like this for
# all example commands in this configuration file.
#
# gesture swipe up xdotool key super+Page_Down
# Move to prev workspace (works for GNOME/KDE/etc on Wayland and Xorg)
# gesture swipe down _internal ws_down
# gesture swipe down xdotool key super+Page_Up
# Browser go forward (works only for Xorg, and Xwayland clients)
gesture swipe left swaymsg workspace next
# Browser go back (works only for Xorg, and Xwayland clients)
gesture swipe right swaymsg workspace prev
# NOTE: If you don't use "natural" scrolling direction for your touchpad
# then you may want to swap the above default left/right and up/down
# configurations.
# Optional extended swipe gestures, e.g. for browser tab navigation:
#
# Jump to next open browser tab
# gesture swipe right_up xdotool key control+Tab
#
# Jump to previous open browser tab
# gesture swipe left_up xdotool key control+shift+Tab
#
# Close current browser tab
# gesture swipe left_down xdotool key control+w
#
# Reopen and jump to last closed browser tab
# gesture swipe right_down xdotool key control+shift+t
# Example of 8 static workspaces, e.g. using KDE virtual-desktops,
# arranged in 2 rows of 4 columns across using swipe up/down/left/right
# to navigate in fixed planes. You can also add the "-w/--wrap" option
# to allow wrapping in any direction. You must configure your virtual
# desktops with the same column dimension.
# gesture swipe up _internal --cols 4 ws_up
# gesture swipe down _internal --cols 4 ws_down
# gesture swipe left _internal --cols 4 ws_left
# gesture swipe right _internal --cols 4 ws_right
#
# Example of 16 static workspaces, e.g. using KDE virtual-desktops,
# arranged in 4 rows of 4 columns across using swipe up/down/left/right
# to navigate in fixed planes, and also using swipe
# left_up/left_down/right_up/right_down to navigate diagonally. You can
# also add the "-w/--wrap" option to allow wrapping in any direction
# and/or diagonally. You must configure your virtual desktops with the
# same column dimension.
# gesture swipe up _internal --cols 4 ws_up
# gesture swipe down _internal --cols 4 ws_down
# gesture swipe left _internal --cols 4 ws_left
# gesture swipe right _internal --cols 4 ws_right
# gesture swipe left_up _internal --cols 4 ws_left_up
# gesture swipe left_down _internal --cols 4 ws_left_down
# gesture swipe right_up _internal --cols 4 ws_right_up
# gesture swipe right_down _internal --cols 4 ws_right_down
# Example virtual desktop switching for Ubuntu Unity/Compiz. The
# _internal command does not work for Compiz but you can explicitly
# configure the swipe commands to work for a Compiz virtual 2
# dimensional desktop as follows:
# gesture swipe up xdotool key ctrl+alt+Up
# gesture swipe down xdotool key ctrl+alt+Down
# gesture swipe left xdotool key ctrl+alt+Left
# gesture swipe right xdotool key ctrl+alt+Right
# Example to change audio volume:
# Note this only works on an Xorg desktop (not Wayland).
# gesture swipe up xdotool key XF86AudioRaiseVolume
# gesture swipe down xdotool key XF86AudioLowerVolume
###############################################################################
# PINCH GESTURES:
###############################################################################
# GNOME SHELL open/close overview (works for GNOME on Xorg only)
# gesture pinch in xdotool key super+s
# gesture pinch out xdotool key super+s
# KDE Plasma open/close overview
# gesture pinch in xdotool key ctrl+F9
# gesture pinch out xdotool key ctrl+F9
# GNOME SHELL open/close overview (works for GNOME on Wayland and Xorg)
# Note since GNOME 3.24 on Wayland this is implemented natively so no
# real point configuring for Wayland.
# gesture pinch in dbus-send --session --type=method_call --dest=org.gnome.Shell /org/gnome/Shell org.gnome.Shell.Eval string:'Main.overview.toggle();'
# gesture pinch out dbus-send --session --type=method_call --dest=org.gnome.Shell /org/gnome/Shell org.gnome.Shell.Eval string:'Main.overview.toggle();'
# Optional extended pinch gestures:
# gesture pinch clockwise <whatever command>
# gesture pinch anticlockwise <whatever command>
###############################################################################
# This application normally determines your touchpad device
# automatically. Some users may have multiple touchpads but by default
# we use only the first one found. However, you can choose to specify
# the explicit device name to use. Run "libinput list-devices" to work
# out the name of your device (from the "Device:" field). Then add a
# device line specifying that name, e.g:
#
# device DLL0665:01 06CB:76AD Touchpad
#
# If the device name starts with a '/' then it is instead considered as
# the explicit device path although since device paths can change
# through reboots this is best to be a symlink. E.g. instead of specifying
# /dev/input/event12, you should use the corresponding full path link
# under /dev/input/by-path/ or /dev/input/by-id/.
#
# You can choose to use ALL touchpad devices by setting the device name
# to "all". E.g. Do this if you have multiple touchpads which you want
# to use in parallel. This reduces performance slightly so only set this
# if you have to.
#
# device all
###############################################################################
# You can set a minimum travel distance threshold before swipe gestures
# are actioned using the swipe_threshold configuration command.
# Specify this value in dots. The default is 0.
# E.g. set it to 100 dots with "swipe_threshold 100".
# swipe_threshold 0
###############################################################################
# You can set a timeout on gestures from start to end. The default is
# the value commented below. It can be any value in float secs >= 0.
# 0 = no timeout. E.g. set it to 2 secs with "timeout 2".
# timeout 1.5

View File

@ -1,10 +1,9 @@
# Main tools mapping
set $term alacritty
set $menu "ulauncher"
set $menu "ulauncher-toggle"
set $filemanager thunar
set $processviewer $term -e htop
# start a terminal
bindsym $mod+Return exec $term

View File

@ -2,6 +2,8 @@
assign [app_id="firefox"] $browser_workspace
assign [class="Hexchat"] $chat_workspace
assign [class="Slack"] $chat_workspace
assign [class="Slack"] $chat_workspace
assign [instance="element"] $chat_workspace
assign [class="Gvim"] $editor_workspace
assign [class="jetbrains-idea-ce"] $ide_workspace
assign [class="libreoffice"] $note_workspace

View File

@ -1,5 +1,5 @@
# Start up notification manager
exec --no-startup-id mako
exec kdeconnect-indicator
exec spotify
exec slack
exec ulauncher --hide-window
exec libinput-gestures-setup start

View File

@ -21,6 +21,7 @@ for_window [window_type="dialog"] floating enable
for_window [window_type="menu"] floating enable
for_window [window_role="About"] floating enable
for_window [app_id="ulauncher"] border none
for_window [app_id="wofi"] border none
include ~/.config/sway/conf.d/*
include /etc/sway/config.d/*

View File

@ -6,6 +6,6 @@
"render-on-screen": "mouse-pointer-monitor",
"show-indicator-icon": true,
"show-recent-apps": "0",
"terminal-command": "",
"terminal-command": "alacritty -e /usr/bin/fish -c",
"theme-name": "dark"
}
}

View File

@ -3,7 +3,7 @@
"id": "feb919a9-ec3f-41dd-8cee-07be86cc0901",
"name": "Stack Overflow",
"keyword": "so",
"cmd": "http://stackoverflow.com/search?q=%s",
"cmd": "xdg-open \"http://stackoverflow.com/search?q=$@\"",
"icon": "/usr/share/ulauncher/media/stackoverflow-icon.svg",
"is_default_search": true,
"run_without_argument": false,
@ -13,7 +13,7 @@
"id": "a61d5cbd-4e61-45ff-ae0e-a08e8f9242f5",
"name": "Wikipedia",
"keyword": "wiki",
"cmd": "https://en.wikipedia.org/wiki/%s",
"cmd": "xdg-open \"https://en.wikipedia.org/wiki/$@\"",
"icon": "/usr/share/ulauncher/media/wikipedia-icon.png",
"is_default_search": true,
"run_without_argument": false,